In the process of using the hanger, sometimes the discoloration occurs, and the dip hanger manufacturer may also occur during the production, which may be due to the plating process or the plating material.

 

　　The first part is the hanger hook part, because most of the inner hangers are made by hanging plating. If the plating is not uniform, the hanger hooks will be partially discolored. Then there is the hanger clip part. After the hanger clip is worn, it is electroplated. When plating, it may contact the plating solution unevenly, which makes the plating poor, which will affect the color. Once again, it is the part of the logo. The front side is generally not present. The more obvious is the spot welding on the back side.

 

　　These contents also indicate that we must carefully check when purchasing the dipped hangers, no matter whether it is quality or appearance, no defects are required.